7
Look foward to it.
Start-up steam
Insert the plug into an earthed socket. The display turns on
and there is power.
The display goes to OFF. (Standby)
Press button.
A
on the display. The appliance switches on
and begins to heat.
The symbol
L
for heating l ashes on the display during the
heat-up phase (approx. 5 minutes).
The symbol stops l ashing once the temperature is reached.
You can now use the steam function.
INFO:
The heating symbol l ashes during operation to indicate that
the appliance is reheating to deliver sufi cient pressure and
temperature.
Switching off the appliance
Press button
A
to switch off the appliance. The appliance
switches off after approx. 10 seconds. OFF is shown on the
display. (Standby)
Steam function
Hold down steam lever
P
on the handle to emit steam.
You can set the steam mode by pressing buttons
T2
+ or
T2
on the side of the handle.
There are 3 steam modes to choose from:
Mode 1 = minimal steam volume, use on sensitive sur-
faces like wood, parquet, upholstery etc.
Mode 2 = medium steam volume, use on windows, glass,
tiles, stone etc.
Mode 3 = maximum steam volume, use on all resistant
surfaces that have previously been scrubbed
with cleaning agents and water, such as tiles,
granite, stainless steel etc.
The mode is indicated with 1-2-3 on the display
M
on the
symbol for steam.
WARNING:
Water droplets may occur on i rst use, which may be due to
incomplete heat stabilisation in the housing. For this reason,
we recommend aiming the i rst steam jet at a cloth until an
even l ow of steam is achieved.
INFO:
For sensitive materials carry out a test i rst on a sample
or on an inconspicuous, concealed area. Always start with
mode 1 (minimal steam volume).
A
L M
P
T2
