Look foward to it.
Maintenance / cleaning
Replacing the air filter (HEPA filter)
The HEPA ilter should be replaced if suction power drops
dramatically, but at least once per year.
Proceed as follows to inspect the ilter:
The sound-prooing casing with inbuilt ilter is located on the
underside of the appliance.
• In order to check or replace the ilter, loosen the ixing
screw in the centre of the housing by hand and remove the
sound-prooing casing.
• The ilter is located at the back of the sound-prooing ca-
sing.
• Re-install the sound-prooing casing after replacing the
HEPA ilter and secure in place using the ixing screw.
• Ensure the ilter is correctly positioned in the slot.
• The HEPA ilter must be replaced with a new ilter if it be-
comes worn or damaged after an extended period of use.
WARNING:
Cleaning the filter
Both reservoirs are protected from contamination by
a ilter.
If you need to clean the ilters, rinse them thoroughly
with plenty of hot water and a neutral cleaning agent.
