Warning:
Descaler residue can be harmful to health and damage surfaces. Wipe up
drops immediately. Read the information on the descaler packaging and follow the safety
instructions.
2. Descaling
a)
Open cap (O) “Water Only” and pour 0.4 litres of
beam descaler into the “Water Only” reservoir.
Now connect the appliance to the mains and press
button (A) on the display. The pump runs for approx.
50 seconds. The water shortage alert then sounds,
and the water tap symbol (F) flashes on the display.
Now disconnect from the mains power again by
pulling out the plug.
Empty the boiler after
15 minutes
.
Place a suitable container under the appliance and open
the drain plug on the underside of the appliance by
turning it to the left (spanner width 13). Drain the boiler
and then re-close the drain plug using a ring or open-
end spanner.
Boiler descaling / step 2
Button (A)
Symbol (F)
Cap (O)
Warning:
Working time approx. 15 minutes
b)
c)
