4. Re-assembly
Remove the probe cap from the container and rinse
well under clear running water. Then screw it back
onto the boiler by pressing down and turning to the
right at the same time.
Insert the HEPA filter (U) at the back of the sound-
proofing casing. Attach the housing to the appliance
and re-secure using the central fixing screw.
Fill the “Water Only” reservoir with 3 litre of clean
tap water. Plug in the appliance and press button
(A) on the display.
The boiler must be refilled back to the minimum fill level following descaling. It may be
necessary to press button (A) on the display several times until this is done.
Water Only Reservoir Button (A)
c)
b)
a)
HEPA - filter
