5
If the Remote Control device is to be installed with an existing ceiling fan with any of the above Wall
Manual Fan Controls, PLEASE Replace Fan wall controller with the Double pole ON/OFF switch shown
below:
Note: A double pole wall switch must be included in the wiring installation. The double pole switch
allows disconnect the remote controller from the mains 240VAC power during maintenance and
cleaning of the ceiling fan.
OPERATING THE REMOTE:
ICONS ON THE REMOTE LCD PANEL
Before you start using the remote, take the time to read through this section and get familiar with the button and
function of each button.
Fig. 5
Auto mode temperature/fan timer setting indicator:
This indicator display the temperature setting of the fan in FAN AUTO mode, and the FAN TIMER value which
switch off the fan at the pre-set time. The indicator will switch every 2 second to display set temperature and fan
timer respectively.
Room temperature / Light timer indicator:
This indicator displays the Room ambient temperature, and the LIGHT TIMER value which switch off the lamp
at the pre-set time. The indicator will switch every 2 second to display Room temperature and Light timer
respectively.
