4
Fig. 3 Fig. 4
NOTE: This remote/controller is only suitable where the controller/receiver can be inserted inside the
canopy cover safely and securely. Ceiling fan with mount bracket type shown in Fig. 4 would be
suitable.
NOTE: The controller wiring circuit must NOT be shared with any electrical equipment that is sensitive
to voltage fluctuation, such as flooding with infrared sensor.
DO NOT use the wiring of the controller, other than for the purpose supplying power into the controller,
and connections to the equipment that is under control. Any outside wiring connections which is not
part of the controller/controlled circuit may affect the operation of the controller, and will void warranty.
NOTE: Slope ceiling angle should not exceed the fan hanging system supported degrees. It will damage
the receiver and causes electric shock. Please check with retailer about pitch angle suitable for fan
slope ceiling mounting with remote control.
NOTE: DO NOT use the above Fan Wall Controls or any other ones that have speed adjustment / light
dimmer function with the Fan that has Remote Control device to avoid damage to the Remote as
following:
CAUTION!
FAN
1
2
3
OFF
LIGHT
DIMMER
FAN
1
2
3
OFF
LIGHT
