background image

10. MAINTENANCE

Service and maintenance must be performed by an authorised agent. 

DO NOT tamper with, or attempt to adjust, the pressure switch or safety 

valve. Before moving, or carrying out any maintenance on the 

machine

make sure the ignition switch is OFF, and that the tank pressure has been 

vented. Allow the 

machine

 to cool down for a period of time.

10.1.

 

To keep the engine in good working condition, periodic maintenance is essential. 

10.2.

 

Engine. 

10.2.1.

 

For all engine maintenance

,

 please refer to the engine manufacturers’ handbook (supplied)

.

 

11. TROUBLESHOOTING

11.1.

 

If you are experiencing a problem that is not listed in this chart, or have checked all the 

possible cause listed and you are still experiencing the problem, see your authorised dealer. 

11.2.

 

Petrol Trouble shooting see supplied Engine manual.

11.2.1.

 

Petrol Engine Model – for further details see engine owner’s manual. 

Problem 

Cause 

Correction 

machine has following 

problems: failure to 

produce pressure, erratic 

pressure, chattering, loss of 

pressure, low water volume. 

1. Low pressure spray tip installed.

1. Replace with high pressure spray tip.

2. Spray tip is obstructed.

2. Clean spray tip.

3. Spray gun leaks.

3. Replace spray gun.

4. Inadequate water supply.

4. Provide adequate water flow.

5. Clogged inlet hose screen.

5. Check and clean inlet hose screen.

6. Water supply is over 100°F (38°C).

6. Provide cooler water supply.

7. High pressure hose is blocked or

leaks. 

7. Clear blocks in outlet hose.

8. Water inlet is blocked.

8. Clear inlet.

9. Inlet hose is kinked or leaking.

9. Straighten inlet hose, patch leak.

10. Pump is faulty.

10. Contact local service facility.

Detergent fails to mix with 

spray. 

1. Detergent siphoning tube is not

submerged. 

1. Insert detergent siphoning tube into

detergent. 

2. Detergent siphoning tube/filter is

clogged or cracked. 

2. Clean or replace filter/detergent

siphoning tube. 

3. High pressure spray tip installed.

3. Replace with low pressure spray tip.

Engine lacks power. 

1. Dirty air filter.

1. Replace air filter.

Page 20

http://www.honda-engines-eu.com/

Summary of Contents for B2565HA





























Reviews: