7. STARTING YOUR WASHER
7.1.
How to Start Your Pressure Washer.
7.1.1.
To start your pressure washer for the first time, follow these instructions step-by-step. This
starting information also applies if you have let the pressure washer sit idle for at least a day.
7.1.2.
Place pressure washer near an outside water source capable of supplying water at a flow
rate greater than 14.37 litres per minute and no less than 20 PSI at pressure washer end of
garden hose.
7.1.3.
DO NOT siphon supply water.
7.1.4.
Make sure machine is in a level position.
7.1.5.
Connect garden hose to water inlet on pressure washer pump.
DO NOT run the pump without the water supply connected and turned on.
Damage to equipment resulting from failure to follow this instruction
will void warranty.
7.2.
Attach wand extension to spray gun. Tighten by
hand.
7.3.
Choose desired spray tip, pull back nozzle extension
collar, insert spray tip and release collar.
7.3.1.
Tug on spray tip to make sure it is securely in
place. See Spray Tips.
7.4.
Uncoil high pressure hose and attach quick connect
end of hose to base of spray gun.
7.4.1.
Pull down on collar of quick connect, slide
onto spray gun and let go of collar.
7.4.2.
Tug on hose to be sure of tight connection.
The high pressure stream of water that this equipment produces
can cut through skin and its underlying tissues, leading to serious
injury and possible amputation.
7.5.
NEVER connect high pressure hose to nozzle extension.
7.5.1.
Keep high pressure hose connected to pump and spray gun while system is pressurized.
7.5.2.
Always make sure that the spray gun, nozzles and accessories are correctly attached.
7.6.
Similarly, attach other end of high pressure hose to high pressure outlet (A) (Shown on following page)
on pump.
7.6.1.
Pull down on collar of quick connect, slide onto pump and let go of collar.
7.6.2.
Pull on hose to be sure of tight connection.
Page 15
Summary of Contents for B2565HA
Page 27: ...NOTES Page 27...
