FOR SERVICE: 1-866-850-6662 & WWW.BEPRESSURE.COM
6
7
FOR SERVICE: 1-866-850-6662 & WWW.BEPRESSURE.COM
START-UP
3b
Fill gas tank on en-
gine with unleaded
gasoline only.
Attach high pressure
hose to base of Spray
Gun.
5b
6.5
HP
3a
Fill gas tank on
engine with unleaded
gasoline only.
Attach high pressure
hose to outlet Quick-
Connect fitting on
pump.
4
6
Ensure the inlet
filter is clean. Attach
Garden hose to
inlet garden hose
connector on pump,
and turn on water.
Attach high pressure
hose to front of Spray
Gun.
5a
7
Attach nozzle to tip of
Lance.
5
HP
13
HP
Check engine oil (SAE
10-30W). Oil Level
should read between
the hash marks on
dipstick.
2a
1
START-UP PROCEDURE (5HP, 6.5HP, &13HP UNITS)
Each step listed below is numbered above to give you an exact location on the
unit.
Pump Oil does not need to be re-
placed. There is 4.5 ounces of oil in
the pump which will last the life of
the pump.
*However, if the pump
has a site glass, the pump oil may
need replacing. Refer to Step 3 in
the troubleshooting guide.
5
HP
6.5
HP
Check pump oil (30W
non-detergent). Oil lev-
el should read on the
middle or just below on
the sight glass.
2b 13
HP
5
HP
6.5
HP
13
HP
5
HP
6.5
HP
13
HP
