Version 0.2
31 July 2013
www.iHome.eu
Configuration Reset
The Panic Watch Supports a configuration resets function. Configuration reset means
-
All configuration values are defaulted.
This function can be activated by sending a configuration set frame:
CONFIGURATION_SET
Parameter:
0x01
Size:
0x01 (can’t be different from 1)
Value:
0xFF (can be any value except for 0x55 or 0xAA)
When the value of configuration value is requested 2 possible values can be returned
CONFIGURATION_REPORT
Parameter:
0x01
Value 0x55:
Device doesn’t have all his configuration settings anymore.
Even when a configuration parameter is changed back to the default value
Value 0xAA:
Devices still has all his factory settings.
This are only configuration parameters, wake up interval can be changed.
Always awake mode
The always awake mode is used to request different values from the device e.g. version and manufacturer
specific.
The always awake mode can be activated by:
CONFIGURATION_SET
Parameter:
0x05
Size:
0x01 (can’t be different from 1)
Value:
0x03 (mode 3)
The always awake mode can be deactivated by:
CONFIGURATION_SET
Parameter:
0x05
Size:
0x01 (can’t be different from 1)
Value:
Any value except 3
A second option to deactivate mode 3 is
1.
Remove batteries.
2.
Wait ca 10 seconds.
3.
Replace batteries
Note:
in always awake mode the batteries will be drain very fast, we do not recommend to use this mode.
