![background image](http://html.mh-extra.com/html/seiko/wired-w543/wired-w543_instruction_1235253001.webp)
■FEATURSE
The watch has the following functions:
● Time/display・・・・・・・・・・・・・・・・・・・・・Hour, minutes and seconds can be displayed.
● Calendar display. ・・・・・・・・・・・・・・・・Year, month and date can be displayed.
● Automatic calendar ・・・・・・・・・・・・・・・No calendar adjustment at the end of the month is required from
2004 to 2050.
■DISPLAY AND BUTTON OPERATION
※In some models, the orientation of the display screen may be different from the above illustration or the display
may look partly divided due to the prints of its glass cover. However, the operation is the same as the above.
●With each press of button
A
, the display changes in the following order.
●When the display is changed, numerals and indications on the display screen scroll from right to left.
Time display: Current time (hour, minutes, seconds)
Calendar display: Year (the last two digits of the year), month, date
●In the calendar display, "Year", "Month" and "Date" will be displayed above numerals showing year,
month and date, respectively.
■SPECIFICCATIONS
1. Frequency of crystal oscillator ・・・・・・・・・・・・・・32,768Hz
(Hz=Hertz…Cycles per second)
2. Loss/gain ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Average monthly rate: ±30 seconds
(in temperatures of between 5℃ and 35℃ on your wrist)
3. Operational temperature range ・・・・・・・・・・・・・・−5℃〜+50℃
(0℃〜+50℃ for the display)
4. Display medium ・・・・・・・・・・・・・・・・・・・・・・・・・・・Nematic Liquid Crystal, FEM
(Field Effect Mode)
5. Battery ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・Lithium battery SB-AS, 1 piece
6. Battery life ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・Approx. 2 years
7. IC (Integrated Circuit) ・・・・・・・・・・・・・・・・・・・・・・C-MOS-IC, 1 piece
※ The above specifications are subject to change without prior notice, for product improvement.
WIRED W543
だきありがとうございました。
このたびはワイアードをお買いあげいた
ご使用の前にこの取扱説明書をよくお読み
のうえ正しくご愛用くださいますようお願
い申し上げます。
なお、この取扱説明書はお手もとに保存し
必要に応じてご覧ください。
0403
W543
取扱説明書
INSTRUCTION
取扱説明書
INSTRUCTION
セイコー製品について、修理その他のご相談は、
「お買い上げ店」で
うけたまわっております。
なお、ご不明の点は下記へお問い合せください。
お客様相談室
東京都千代田区鍛冶町
2-1-10
大阪市西区新町
1-4-24
(大阪四ツ橋新町ビルディング 8階)
101-0044
550-0013
〒
〒
060-0061
810-0801
札幌市中央区南一条西
7-20-1
(札幌スカイビル 4階 セイコーサービスセンター内)
福岡市博多区中洲
5-1-22
(松月堂ビル
6階 セイコーサービスセンター内)
お客様相談係
〒
〒
〒
全国共通フリーダイヤル
0120-612-911(下記の最寄地に着信いたします)
本 社 東京都港区芝浦一丁目2番1号 〒
105-8467
取扱説明書
INSTRUCTION
■REMARKS ON THE BATTERY
● Notes on the battery
(1) Battery life
When a new normal battery is installed, this watch operates for approximately 2 years.
(2)Monitor battery
The battery in your watch may run down in less than two years after the date of purchase, as it is a monitor battery which is
inserted at the factory to check the function and performance of the watch.
(3)Battery change
①For battery replacement, be sure to have the battery replaced with a new one at the retailer from whom the watch was
purchased, and request the battery for exclusive use with the SEIKO watches.
②If the old battery is left in the water for a long time, a malfunction may be caused due to battery leakage, etc. Have it
replaced with a new one as soon as possible.
③Battery replacement is charged even if it runs down within the guarantee period.
④Once the case back is opened for battery replacement or other purposes, the original water resistant quality designed for
the watch may deteriorate when it is closed. When you have the battery replaced with a new one, also request the water
resistance test pertaining to the water resistant quality of your wtach. If your watch has 10-bar or higher water resistant
quality, be sure to have such test performed on the watch every time the battery is replaced.
1. Do not remove the battery from the watch.
2. If it is necessary to take out the battery, keep it out
of the reach of children.
3. If the child swallows it, consult a doctor
immediately as it will adversely affect the health of
the child.
WARNING
1. Never short-circuit, tamper with or heat the battery, or
never expose it to fire as it may explode, generate and
intense heat or catch fire.
2. The battery in your watch is not rechargeable. Never
attempt to recharge it, as this may cause battery
leakage or damage to the battery.
3. If the watch is left in a temperature below 5℃ or above
35℃ for a long time, it may cause the battery life to be
shortened. Also, the liquid crystal panel may decrease in
contrast, and the electroluminescent light may illuminate
for a shorter period of time.
CAUTION
■NECESSARY PROCEDURE AFTER BATTERY CHAGE (RESETTING THE IC)
After the battery is replaced with a new one, or when an abnormal display (broken digits, etc.) appears, follow the
procedure below. The built-in IC will be reset and the watch will resume normal operation.
●Resetting the built-in IC
Press buttons
A
,
B
and
C
simultaneously for 2 to 3 seconds, and all displays and indications disappear. When
the buttons are released,
12:00'00
a.m., Jan. 1
st
, 2004 will be displayed. set the time and calendar before
using the watch.
●After setting the IC
Before using the watch, adjust the following display in the order below by referring to the corresponding sections of
this instruction manual.
1. Time/calendar
■NOTE ON THE REPLACEMENT PARTS
(1) SEIKO makes it a policy to usually keep a stock of spare parts for its watches for 7 years. In principle, your watch can be
reconditioned within this period if used normally. (Replacement parts are those which are essential to maintaining the func-
tional integrity of the watch.)
(2) The number of years that a watch is considered repairable may vary greatly depending on the condition under which it was
used, and normal accuracy may not be achieved in some cases. We recommend, therefore, that you consult the retailer
from whom the watch was purchased, when having them repair your watch.
(3) The case, dial, hands, glass, bracelet, or parts thereof may be replaced with substitutes if the originals are not available.
■VIVIDIGI
"VIVIDIGI" is a newly developed liquid crystal panel that has various color combinations of segments and background
and lights up in various manners, providing wide varieties of displays.
Features
(1) "VIVDIGI" has high light-transmissivity and lightreflectance to give a vivid and clear display.
(2) The segments for digits and the entire background of the display can be illuminated in various colors.
(3) Either the whole display or only the segments are illuminated depending on models.
※Above features of "VIVIDIGI" are embodied differently from model to model.
■NOTE ON THE LIQUID CRYSTAL PANEL
The normal life expectancy for the liquid crystal panel of the watch is approximately 5 years. After that, it may decrease
in contrast, becoming difficult to read. Please contact the retailer from whom the watch was purchased to have the liq-
uid crystal panel replaced with a new one.
It will be made at cost.
●PRECAUTIONS ON WEARING YOUR WATCH
Take utmost care in the following cases:
・When clasping and unclasping the band, you may damage your nail, depending on the type of clasp used with the band.
・In case you tumble and fall or bump into others with the watch worn on your wrist, you may be injured by the reason of the
fact that you wear the watch.
・When you make contact with children, especially with infants, they may get injured or develop a rush caused by allergy.
・If your watch has a light-colored urethane or leather band, special care should be taken to keep it clean, as such bands easily
get soiled or discolored. Also, take utmost care not to bring the band into close contact with clothes or bags made of denim
and other materials whose color easily come off. The dye may stick to the band to make indelible stains.
●PERIODIC CHECK
・We suggest that you have your watch checked by watch dealer every 2 or 3 years or when the battery is replaced for oil con-
dition, battery electrolyte leakage or damage due to water or sweat. After checking the watch, adjustment and repair may be
required.
・When the replacing the parts or battery, please specify
GENUINE PARTS" . If an old battery is kept in the watch for a long
time, electrolyte leakage from the battery may damage the module.
・Be sure to have the gasket and push-pin replaced with new ones by a watch dealer when checking the watch or the battery is
replaced.
・If your watch is of the fob or pendant type, the strap or chain attached to the watch may damage your clothes, or injure the
hand, neck, or other parts of your body.
CAUTION
■ TO PRESERVE THE QUALITY OF YOUR WATCH
●WATER RESISTANCE
・Check the dial or case back of your
watch for the water resistant quality,
and then see the table below.
・Do not turn or pull out the crown when
the watch is wet, as water may get
inside the watch.
CAUTION
・If your watch is 3 bar water resistant, do not use it in water.
・If your watch is 5 bar water resistant, do not use it in any type of diving including skin diving.
・If your watch is 10 or 20 bar water resistant, do not use it in saturation diving or scuba diving.
WARNING
×
×
×
×
×
○
○
×
×
○
○
×
×
×
×
○
○
○
×
×
×
×
×
○
Designed and ma-
nufactured to with-
stand the water usu-
ally experienced in
a daily living such as
splashes and rain.
“WATER RESISTANT” is not inscri-
bed on the back of your watch case.
Designed and ma-
nufactured or swi-
mming and kitch-
en work.
Skindiving without
scuba.
Genuine diving us-
ing scuba or heliu-
mgas.
Button operation
when the watch is
wet.
Crown operation
when the watch is
wet.
“WATER RESISTANT” is inscribed
on the back of your watch case.
5 BAR.
10 · 15 ·
20 BER.
“WATER RESISTANT 5 ·
10 · 15 · 20 BER.”, “WATER
RESISTANT” and marks in-
scribed on the back of your
watch case.
●PLACES TO KEEP YOUR WATCH
・If the watch is left in a temperature
below -5℃ or above +50℃ for a long
time it may function improperly or stop
operating.
※This watch is so adjusted that it will main-
tain stable time accuracy in normal temper-
atures.(5℃〜35℃)
It will lose or gain slightly, but it will regain
high time accuracy when it returns to nor-
mal temperature.
・Do not leave
the watch in a
place where it is
subjected to
strong magnet-
ism or static
electricity.
・Do not leave the
watch where there
is strong vibration.
・Do not leave the
watch in a dusty
place.
・Do not expose the watch to gases or
chemicals.
(Ex.: Organic solvents such as ben-
zine and thinner, gasoline, nail polish,
cosmetic spray, detergent, adhesives,
mercury, and iodine antiseptic solu-
tion.)
・Do not leave the watch in a hot spring,
or do not keep it in a drawer having
insecticides inside.
×
×
×
●RASH AND ALLERGY
・Adjust the bracelet or band so that there will be a little clearance between the bracelet or band and your wrist to avoid
accumulation of perspiration.
・If you are constitutionally predisposed to rash, the band may cause you to develop a rash or an itch depending on your
physical condition.
・The possible causes of the rash are as follows:
1. Allergy to metals or leathers
2. Rust, dust or perspiration on the watch or band
・If you develop any skin reactions, take off the watch and consult a doctor immediately.
CAUTION
MODE
UP
DOWN
Hour
Button
A
Button
B
Button
C
Minutes
Seconds
MODE
UP
DOWN
MODE
UP
DOWN
Button
A
Button
A
「TIME display」
「Calendar display」
A
(Changeover of displays)
■HOW TO SET THE TIME / CALENDAR
①Press button
A
to show the Time display.
②Press button
A
for 1 to 2 seconds to show the Time/Calendar setting display.
※If the watch is left untouched with the digits flashing, it will automatically return to the Time/Calendar display in 1 to 2
minutes.
③Press button
A
to select the digits to be adjusted (flashing). With each press of button
A
, the digits are
selected (flashing) in the following order.
MODE
UP
DOWN
Button
A
Time display
※Flashing digits scroll from right to left.
MODE
UP
DOWN
The second digits start flashing.
Button
A
Button
B
Button
C
Button
A
Button
A
Button
A
Button
A
Button
A
Button
A
Button
A
Seconds
Minutes
Hour
Year
Month
Day
Time display (end of adjustment)
12/24-hour indication
(Both the hour and
minute disits flash.)
④Press button
B
or
C
to set the flashing digits. With each press of button
B
, one digit is increased. The
digits move quickly if button
B
is kept pressed. With each press of button
C
, one digit is decreased. The
digits move quickly if button
C
is kept pressed.
When both the hour and minute digits are flashing, change between 12-hour and 24-hour indications can
be made. In 12-hour indication, only "PM" mark is displayed and there is no indication for the AM setting.
⑤Select the hour and minutes digits (12/24-hour indication) by pressing button
A
, and then press button
A
again to return to the Time display.
●Second setting:While the second digits are flashing, press button
B
or
C
in accordance with a time
signal to reset the seconds to "00". If button
B
or
C
is pressed when the seconds
count any number between "30" and "59", one minute is added and the seconds are
immediately reset to "00".
<All the segments lightning up>
※While in the TIME/CALENDAR SETTING display, the display as shown below will appear if both buttons
B
and
C
are pressed at the same time. This is not a malfunction. Press button
A
,
B
or
C
to return to the TIME/CARENDER
display, and then set the time/calendar again following the steps above starting from 1 .
●CARE OF YOUR WATCH
・The case and bracelet touch the skin directly just as underwear. If they are left dirty, the edge of a sleeve may be stained
with rust of those who have a delicate skin may have a rash.
・After removing the watch from your wrist, wipe perspiration or moisture with a soft cloth. This will prevent the watch from
being soiled, adding to the life of the gasket.
METAL BRACELET
・Clean the watch bracelet with a soft toothbrush dipped in water or soapy water. If your watch is not water-resistant, be
careful not to get the case wet when cleaning.
LEATHER BAND
・When removing moisture from a leather band, do not rub the band with the cloth as this may discolor it or reduce its gloss.
Be sure to blot up the moisture using a soft dry cloth.
SOFT PLASTIC BRACELET
・If your watch has a soft plastic band such as urethane band, do not leave the watch under a fluorescent lamp or direct
sunlight for a long time, or do not leave the band soiled. Otherwise, the band may be discolored, hardened or broken. Also,
do not keep the watch in a place where it is exposed to high humidity, or do not leave the band wet with perspiration or
water. Otherwise, the band may be discolored in a very short time.
When the band is soiled, rinse it in soapy water. Do not use solvents for cleaning as some solvents may deteriorate the
band.
If your watch has a semitransparent urethane band, which is easily discolored, special care should be taken to keep it
clean. Depending on the condition of use, the semitransparent band may be discolored after several months of use.
●If your watch is not water-resistant, be careful not to get wet with water or sweat. When it gets wet with water or sweat,
wipe it thoroughly dry with a hygroscopic cloth.
●If your watch is 5, 10 or 20 bar water resistant, rinse it in a bowl of fresh water after used in seawater. Do not use chemicals
to wash it.
●If your watch has a rotating bezel, clean the bezel regularly. Otherwise, dust will gather under it, making the rotation harder.
CAUTION
※If button A is pressed while both the hour and minute digits (12/24-hour indication) are flashing, the display will
return to the Time display. In case you would like to adjust any digits, press button A for 1 to 2 seconds to show
the Time/Calendar setting display again.
MODE
UP
DOWN
Button
A
Button
B
Button
C
●ABOUT BATHING
Your watch can be worm while bathing if it is equipped with water resistance over 10 bar.
・In that case, please note the following carefully.
・Please do not operate your watch (Crown operation, Button operation etc.) When it is wet with soap or shampoo. it sometimes
causes a reduction in the water proofing.
・When the watch gets warm due to warm water, the watch could gain or lose time to some degree. However, the watch will
return to its usual accuracy at normal temperatures.