Be Cool slide flex, Manual

Page: 22 / 44

EN
22
levers situated on both sides of the hammock (5.1 - 5.2). The
hammock is reversible so it can be positioned facing you or
facing forwards
6. ADJUSTING THE HANDLEBAR HEIGHT
A:Press the buttons of bothside and pull the handlebar
upwarkds or downwards.
7. CONVERT COT TO HAMMOCK AND VICE VERSA
7A. Check the red pin to verify this is hidden for correct
position, under hammock or cot configuration.
7B. Press and pull the button there is under the reclining lever,
to convert under cot or hammock configuration. .
7C In the carrycot position, remove and completely the 5 points
of the harness, removing all the buckles from the
back of the backrest and seat through their holes. To convert
the carrycot back to a hammock, reassemble the harness and
follow the steps in reverse order.
8. FOLD AND OPENING THE STROLLER
A: Press down the 2nd safety button and pull upwards the
folding triggers on the backside of side bars. then press down
the handlebar until the pushchair is folded
B: Release the folding catch as the arrow direction and lift up
the handlebar with your two hands until “click” sound.
ATTENTION: THE PUSHCHAIR COULDN’T BE FOLDED WHEN
THE HAMMOCK IS FACING THE PUSHER AND THE HAMMOCK
IS ON THE UPRIGHT POSITION!
9. PRO-FIX SYSTEM
The chassis of your pushchair includes the PRO-FIX system,
ready to fit the following car safety elements: Top Plus, Crib,
One and Zero. The PRO-FIX system makes it easy to fit and
detach these accessories on and off the chassis, quickly,
simply and safely locking them securely onto the chassis. To
do this, carefully follow the instructions for these accessories.
WARNING: It is essential to remove the seat from the push-
chair to be able to fit any of the car accessories
10. ADJUST THE SEAT BELTS TO FIT THE CHILDREN WHENEVER
THEY USE THE PUSHCHAIR
The two side fastening points of the seats can be used to at-
tach an additional harness. Your pushchair is approved for new
born babies. To fit the belts on your baby when he is under 6
months old, pass the shoulder straps through the lower holes.
When your child is over 6 months old, pass the straps through
the holes that are most comfortable for the child.
MAINTENANCE
Keep the metal parts clean and dry to prevent rusting.
Grease the mobile parts and mechanisms regularly with a silicone
based spray.
Do not use oil or grease.
To clean the plastic parts just use mild detergent and warm water.
Do not expose the upholstery to sunlight for long periods of time.
The upholstery may be taken off for washing.
IM 2290,00 SLIDE FLEX INST_print.indd 22 26/7/21 16:18