Seite 23 von 32
INSTALLATION OF THE FILTERS
You can start using your air purifier in just a few steps:
1. Removing the filter cover
Remove the filter cover by pressing down the
two locking tabs.
Then pull the cover away towards the back.
Info: A pre-filter is inserted in the cover, which
filters coarse dirt particles.
2. Remove the HEPA H13 filter
Remove the HEPA H13 filter by pulling the tab
on the top of the filter.
Behind it is the activated carbon filter, which
you can also remove by pulling the tabs.
3. Removing the transport protection
The filters are packed in a plastic film for
protection.
Remove the foil from the filter and make sure
that no foil residues adhere to the filter.
4. Install the activated carbon filter in the
appliance.
Insert the filter into the housing as shown in the
illustration. There is a grip tab on the filter. This
must face outwards to guarantee optimal
function.
