Seite 19 von 32
Table of contents
Important information on safety, location and electrical connection
19 – 20
Recycling, disposal, declaration of conformity
20 – 21
Description of the device
21
Description of the display and the control panel
22
Scope of delivery
22
Commissioning
22 – 24
Operation
25 – 28
Maintenance and cleaning
28 – 30
Troubleshooting
30
Technical information
31
Warranty
32
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE STARTING
ASSEMBLY, INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF
AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO COMPLY
WITH INSTRUCTIONS COULD RESULT IN PERSONS AND / OR PROPERTY DAMAGES
AND / OR LOSS OF THE WARRANTY CLAIM!
IMPORTANT
INFORMATION
ON
SAFETY,
LOCATION AND ELECTRIC
AL CONNECTION.
1.
Read all instructions carefully before using the device.
2.
Use this device only in accordance with the instructions in the manual. Any other use not recommended by
the manufacturer could result in fire, electric shock, or personal injury.
3.
This device is intended for cooling in households and may not be used for any other purpose.
4.
The device is not suitable for continuous and precision operation.
5.
It is forbidden to modify the characteristics of this device in any way and only use replacement parts and
accessories recommended by the manufacturer (failure to do so will void the warranty).
6.
For any repairs to the device, power plug or cable, always and exclusively contact authorized service
centers. The customer service centers can be accessed online at www.becool.at
●
7.
Remove the packaging and make sure the air conditioner is not damaged. If in doubt, do not use the air
conditioner and contact the service center or your seller.
8.
Keep children away from packaging material. If swallowed there is danger of suffocation!
9.
If the power cord is damaged, it must be replaced by the manufacturer or an authorized service center to
avoid all possible risks.
10. The device must be installed in accordance with local electrical system installation and operating
instructions.
11. The electrical socket in which you connect the device must not be defective or loose and must be suitable
for the required current load and above all be reliably earthed. If in doubt, have your electrical installation
checked by a qualified electrician.
12. Before connecting to the device to the electrical socket, you must check whether the type of current and the
mains voltage comply with the information given on the back of the device.
13. Avoid using an extension cord as it could overheat and cause a fire.
14. Do not twist or bend the power cord.
●
