Seite 27 von 32
Reset filter
The unit is equipped with a time-controlled filter exchange function.
The unit signals that the filter needs to be changed by flashing the filter indicator light.
The filter has a service life of approx. 6 - 9 months if the unit is used for 8 hours every
day.
1. When the
- indicator flashes, the unit signals that the filter needs to be
replaced.
2. Replace the filters, proceeding as described under "Commissioning".
3. Press and hold the
button and the
button simultaneously for 3 seconds
to reset the cleaning interval.
4. The filter indicator on the control panel goes out.
NOTE
When the filter indicator flashes, the filter must be replaced.
Cleaning the filter will not achieve the same effect.
Ion function
The air purifier is equipped with an ionizer. This distributes ionized air into the rooms and
removes static electricity.
1. Press the
- button to activate the ionizer - the
indicator lights up when
the function is activated.
2. Press the
button again to deactivate the ionizer.
NOTE
The ionizer can be activated in any mode.
Humidification function
The air purifier is also equipped with a humidifier, the unit measures the relative humidity of
the room air and shows this on the display every 10 seconds for 10 seconds. When the
humidity is displayed, the %RH% indicator on the control element lights up.
Humidification is controlled automatically, if the relative humidity is below 45%, the humidifier
switches on and humidifies until a relative humidity of 60% is reached. If the humidity is
above 60%, the humidification is switched off, Thus always achieving a relative humidity of
45 - 60%, which is the healthiest for humans.
1. Make sure that the water tank is full.
2. Press the
- button to activate the humidification function - the
- indicator lights
up when the function is activated.
3. Press the
button again to deactivate the function.