12
BE-SGGxxx USER MANUAL
WARNING FLYING DEBRIS HAZARD
Stones, chips, and debris can cause serious injury or property damage. Debris can fly 75 ft (25m) in any
direction out of the chute. They can bounce off any fixed objects as well and hit operator, bystanders or
breakable objects.
• Set/engage the brake.
• Pivot the grinder toward the side of the stump, with a fairly light touch feed straight into the stump. As
soon as you feed in, start to swing to the side until you feel the wheel drop off the edge of the stump.
• Change direction and swing back the other way until you feel it reach the other edge of the stump. As you
swing to the side listen to the engine. Provide enough feed to give it a moderate load. If you hear any belt
or clutch squealing you are pushing to hard. If you can not swing it to the side, raise the grinder up. You can
cut roots off by plunging straight through them.
WARNING ROTATING CUTTER WHEEL
Keep hands and feet away. Contact with wheel rotating teeth will cause serious personal injury.
WARNING: FLYING DEBRIS HAZARD
Stones, chips, and debris can cause serious injury or property damage.
Debris can fly 75 ft (25m) in any direction out of the chute. They can bounce off any fixed objects as
well and hit operator, bystanders or breakable objects.
• On these large stumps, DO NOT allow grinder wheels to drop into stump hole. If a hole is in the way of
your progress, fill it with chips or change position.
• When grinding larger stumps, chips may begin to build up under the wheel.
• Release brake and pull machine towards you so that the “chip pile” is directly under the cutting wheel.
• Drop cutter wheel down on “Chip pile”, material will be discharged from machine area.
4. GRINDING THE STUMP
