Page 25
1. Lower the beam to its horizontal position. Make certain the beam is locked securely with the horizontal beam lock.
2. Change the jack stand to transporting position. See
FIGURE 23
.
1) Remove the spring clip and clevis pin from the jack stand.
2) Support the tongue and pivot the jack stand up against the tongue.
3) Secure with the spring clip and clevis pin previously removed.
3. Attach the coupler hitch to a class I or higher 2” ball on the towing vehicle latch securely.
1) If the coupler hitch does not fit on the ball, turn the adjustment nut one turn counter-clockwise.
2) If the coupler hitch is too loose on the ball, turn the adjustment nut one turn clockwise. Then recheck and adjust
accordingly.
4. Connect the safety chains to the towing vehicle.
WARNING!
Do not tow faster than 45mph and check the local, state and federal requirements before
towing on any public road.
NOTE:
Use caution when backing up, using a spotter outside the vehicle is recommended.
OPERATION INSTRUCTIONS
TRANSPORTING THE LOG SPLITTER
Clevis Pin
Spring Clip
Jack Stand
(FIGURE 23)
Page 28
Summary of Contents for AGRI EASE BE-LS22TL6505GC
Page 2: ......