Page 20
NOTE:
This Operator’s Manual covers several models. Log splitter features may vary by model. Not all features in this
manual are applicable to all log splitter models and the log splitter depicted may differ from yours.
Engine Controls
See the Engine Operator’s Manual for the location and
function of the controls on the engine.
Log Dislodger
The log dislodger is designed to remove any partially
split wood from the wedge. This may occur while
splitting large diameter wood or freshly cut wood.
Beam Locks
These two locks, as their name suggests, are used to
secure the beam in the horizontal or the vertical position.
The vertical beam lock is located next to the engine. The
horizontal beam lock is located on the beam support
latch bracket.
Log Tray
The log tray is designed to catch the log after it is
split.
Tongue
The tongue is used to attach to a towing vehicle for
transportation.
Control Handle
The control handle has three positions; Forward, Neutral
and Reverse. See the Operation section for instructions.
End Plate
The end plate holds the log in place while the wedge
splits the log.
Splitting Wedge
The wedge is used to split the wood.
ASSEMBLY & SET-UP INSTRUCTIONS
KNOW CONTROLS & FEATURES
(FIGURE17)
Cylinder
Tongue
Jack Stand
Vertical
Beam Lock
Log Tray
End Plate
Horizontal
Beam Lock
Splitting Wedge
Control Handle
Log Dislodger
Page 23
Summary of Contents for AGRI EASE BE-LS22TL6505GC
Page 2: ......