FEATURE KEYS & FUNCTIONS
1.
Handset
- Answer or place an internal or external call.
2.
Speaker
- Hear the other party during a call without using the handset or headset (Speaker
Mode).
3.
Display
- View information about the options and status of your phone.
4.
Message Waiting Light
- Indicate when you have a new voicemail message.
5.
Pre-programmed (PGM)
Buttons (8, with red LEDs only) - Perform special phone functions (pre-
programmed by the System Administrator).
6.
TRANS
(Transfer) - Put a call on hold while you dial the destination extension number when
transferring calls.
7.
Volume Up/Down (-/+)
Buttons - Decrease/increase the loudness of the speaker or handset
while on a call, or the ringer when not on a call.
8.
TAP Button
- Reconnect (or toggle between) calls on hold, during call transfer, and when
creating conference calls. Also, while dialing, pressing this button once will erase the last dialed
digit and pressing it twice will clear all the dialed digits.
9.
Microphone
- Speak to a caller when using the speaker instead of holding the handset.
10.
HOLD
Button - Place a call on hold and keep the party connected while you hang up or use other
phone features.
Note:
If more than one call is on hold, and you are not currently connected to a call, you can
press this button to scroll through a list of calls on hold; press Tap to connect to the displayed
call.
11.
SPEAKER
button - Switch to Speaker mode to hear a caller instead of holding the handset.
12.
Headset (2.5mm) Jack
- Speak to a caller when using a headset instead of holding the handset.
