SSS3416TBSN
Owner’s Manual
11
Fully Assembled View
Operating Your Grill
CAUTION:
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of
unauthorized parts can create an unsafe condition and environment.
Your natural gas grill has been designed to operate on natural gas only, at a pressure of seven inches water column (7” W.C.).
Check with your gas utility for local gas pressure, because in some areas natural gas pressure varies. Also, check with your gas
company or with local building codes for instructions to install gas supply line or call a licensed and qualified installer.
It is recommended that an ON/OFF manual shut–off valve be installed at the gas supply source:
Outdoors after the gas line exits outside wall and before quick disconnect or before gas supply line enters ground.
Pipe sealing compound or pipe thread tape of the type resistant to the action of natural gas must be used on all male pipe
threads. Apply compound or tape to at least the first three to four threads when making connections.
Never store or use gasoline or other volatile substance in the vicinity of this grill.
Left Side
Right Side
Step12 (Install the grease cup, grease cup support and natural gas hose)
a) Hook the grease cup support (E) into the grooves beneath the grease pan.
b) Put the grease cup (D) onto the grease cup support (E).
c) Keep the natural gas hose, quick release connector and gas supply connection securely,
as shown in diagram. Then connect the gas hose with the tube of burners.
