SSS3416TBSN
Owner’s Manual
9
AA
M6 x 15 Bolt
4 PCS
BB
Spring washer
4 PCS
CC
Flat washer
4 PCS
AA
M6 x 15 Bolt
4 PCS
Step 6 (Install doors )
a) Insert the pin on the bottom of left door (L) into the
pre-drilled hole on the left side of cart base (P).
b) Push down the pin on the top of left door and insert it into
the pre-drilled hole on left front side of front beam (M).
c) Repeat the procedure with the right door (Q) and front
beam (M).
d) Close the two doors.
Step 7 (Install the body assembly with cart
assembly)
a) Put the body assembly (A) onto the cart
assembly.
b) Align the holes on the body assembly with the
holes on the cart assembly.
c) Insert the M6 x 15 bolt (AA), spring washer
(BB) and flat washer (CC) into pre-drilled holes,
and then tighten the bolts by hand.
d) Go back and tighten all the bolts using the
screwdriver provided.
Step 8 (Side shelves assembly)
a) Loosen the eight pre-installed bolts on both
side shelves and allow 1/4 bolt’s length
extend out of side shelves.
b) Align the holes on the right side shelf (C) with
the holes on the body assembly, and then
tighten the bolts by hand.
c) Repeat the same procedure with the left side
shelf (B) and body assembly.
d) Go back and tighten all the bolts using the
screwdriver provided.
