SSS3416TBSN
Owner’s Manual
10
HH
M4 x 12 Bolt
2 PCS
HH
M4 x 12 Bolt
4 PCS
FF
Flat washer
4 PCS
EE
Spring washer
4 PCS
GG
M4 Nut 4
PCS
Step 9 (Install the valve with side knob and knob
support)
a) Align the holes on the side knob support (U) with
the hole on the front of the right side shelf and side
burner valve. Insert one M4 x 12 bolt (HH) into the
pre-drilled holes.
b) Tighten all the bolts using the screwdriver provided
c) Press the knob (V) onto the side knob support (U).
Step 10 (Install the side burner and side burner
frame)
a) Align the holes on the side burner frame (W) with
the holes on the right side shelf (C).
b) Screw the M4 x 12 bolt (HH), flat washer (FF),
spring washer (EE) and M4 Nut (GG) into each
pre-drilled holes by screwdriver provided.
c) Put the side burner grate (X) upon the side
burner frame (W).
Step11 (Install the heating plate, cooking grid and
warming rack)
a) Place the heating plates (J) upon each
burners.(as shown in the diagram).
b) Put the left cooking grid (I) and right cooking
grid (H) upon the heating plates.
c) Put the left warming rack (F) and right warming
rack (G) on the side walls of firebox.
d) Close the top lid.
