KP1711
Owner’s Manual
6
Assembly Instructions
For Best Results
Remove all contents from packaging, and make sure all parts are present before attempting to assemble!
Tighten all bolt connections by hand first, then when the grill is fully assembled, go back and tighten with
a screwdriver until secure.
Step 1
Align the holes in the handle (4) with the hole in
the heat insulation-TH (5) and the hole in the lid
(1). Screw a bolt (A) along with three heat
resistant washers (F) into each pre-drilled hole
and secure with a washer(C), a lock washer (E)
and a nut(D).
Step 2
Align the holes in each handle (4)
with the holes in each heat
insulation-SH (6) and each side
of the grill body (2).
Screw a bolt (A) along with three
heat resistant washer (F) into
each pre- drilled hole and secure
with a washer(C), a lock washer
(E) and a nut (D).
