KP1711
Owner’s Manual
9
Operating the Grill
CAUTION:
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of
unauthorized parts can create an unsafe condition and environment.
The propane-gas supply cylinder to be used must be constructed and marked in accordance with the Specifications for LP-
gas Cylinders of the U.S. Department of Transportation (DOT). Only cylinders marked ‘’ propane’’ must be used. Only use
1-pound (16.4 oz) cylinders equipped with a cylinder connection device compatible with the connection for outdoor cooking
appliances. The propane cylinder must be arranged for vapor withdrawal If the appliance is not in use, the gas cylinder must be
disconnected. Storage of an appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the
appliance. Cylinders must be stored outdoors out of the reach of children and must not be stored in a building, garage, or any
other enclosed area. Your cylinder must never be stored where temperatures can reach over 125°F! Before connection, be
sure that there is no debris caught in the head of the gas cylinder, head of the regulator valve, or in the head of the burner and
burner ports. Connect regulator valve and hand-tighten firmly. Disconnect the propane cylinder from the regulator valve when
the grill is not in use. DO NOT obstruct the flow of combustion air and ventilation air to the grill
Danger: A fire causing death or serious injury may occur if the following is not followed exactly:
Never store or use gasoline or other volatile substances in the vicinity of this grill.
Never store a spare propane cylinder under or near this grill, or in the vicinity of another
potential heat source.
Never fill the propane cylinder beyond 80% full.
Warning: Don’t store spare gas cylinder in or near grill.
Connecting the Gas Cylinder
1. Always confirm that all burner control knobs are in the OFF position before activating the gas supply.
2. Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of the regulator valve, or
in the head of the burner and burner ports.
3. Always connect the gas supply regulators as follows:
Insert the nipple of the valve coupling into the tank valve and tighten the
connection collar by turning it clockwise with one hand while holding the
regulator with the other hand.(See diagram to right)
4. Disconnect the propane cylinder from the regulator valve when the grill is not in use.
5. Do not obstruct the flow of combustion air and ventilation air to the grill.
Fully Assembled View
