KP1711
Owner’s Manual
7
Step 3
Place the reflection shield (10) and the
burner (8) inside the grill body.
Align the hole in burner(8) with the hole
in the reflection shield (10)and the hole in
the grill body, make certain the burner
venturi tube passes through the hole in
the side of the body.
Screw the regulator valve (11) into the
burner venturi tube by turning the nut on
the valve nozzle.
Screw a burner bolt (B) into the
pre-drilled hole.
Step 4
Insert the end of each wire leg (3) into each
pre-drilled hole in grill body and into the
holes on the heating plate(9)
