background image

- 13 - 

Fully Assembled View

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

Operating Your Grill 

 
 

CAUTION

 

Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of unauthorized parts 
can create an unsafe condition and environment. 

 
The LP gas supply cylinder(s) to be used must be:   
a)

 

Constructed and marked in accordance with the specifications for LP gas cylinders of the U.S. Department of Transportation 
(D.O.T.) or the National Standard of the Transportation of Dangerous Goods Commission of Canada for Cylinders, Spheres 
and Tubes (CAN/CSA-B139), as applicable, and   

b)

 

Provided with a listed over-filling prevention device 

c)

 

Provided with a cylinder connection device compatible with the connection for outdoor cooking appliances. 

 
Use only the pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be used. Replacement 
pressure regulators and hose assembly must be those specified by the outdoor cooking gas appliance manufacturer. Use only 
20-pound cylinders equipped with a cylinder connection device compatible with the connection for outdoor cooking appliances. 
The cylinder must include a collar to protect the cylinder valve. Do not drop or handle the cylinder roughly. If the appliance is 
not in use, disconnect the cylinder. 
 
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance. Store 
cylinder outdoors and keep out of the reach of children. Do not store the cylinder in a building, garage or other enclosed areas. 
Never store your cylinder where temperatures can reach over 51.7

Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the head of the 
burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the propane cylinder from the regulator 
valve when the grill is not in use. DO NOT obstruct the flow of combustion air or ventilation air to the grill. Arrange the propane 

Summary of Contents for GFS2616AD-1






















Reviews: