7
8.4. FOOD OR PIT TEMPERATURE DISPLAYS
The DigiQ can display either the food or pit temperature. The default is pit. Press the Food button once to display food
temperature, then press Pit to return.
8.5. SCAN MODE
Pressing PIT + UP invokes the Scan Mode. In the Scan Mode, the display will flash between the pit temperature and the
food temperature about every four seconds. To turn the scan mode off, unplug power. If an alarm occurs during scanning,
the display will show the temperature causing the alarm condition until the alarm condition goes away or is acknowledged
by pressing any key. Pressing the UP or DOWN keys will change the setpoint of the temperature that is shown on the
display.
9. SETTING THE SETPOINTS
To display the pit setpoint temperature, tap the UP or DOWN key while displaying the pit temperature. To set the pit
setpoint simply press the UP or DOWN key.
To display the food setpoint temperature, tap the UP or DOWN key while displaying the food temperature. To set the
food setpoint simply press the UP or DOWN key.
