42
"#
By responding to the
Enter Request:
message at the end of the main
configuration menu with "2" (Change Logical Name), you may change
the identifying name for the device on each port. Print Master 706A
and 708A will respond with:
Enter Port Number (1 to 6, 0=Exit), CR:
Type the number of the desired port followed by <ENTER>. For
example, if you type "1" Master will respond with:
Port
Logical
Name
Prnt Assn
1
Device A
1
Enter Logical name:
Enter the new logical name for Port 1. For example, if you enter
LaserJet
, Print Master will respond with:
Port
Logical
Name
Prnt Assn
1
Device A
1
Enter Port Number (1 to 6, 0=Exit),CR:
If you wish to change the logical name of another port, enter that port
number followed by <ENTER> and repeat the above procedure. If no
additional changes are required, send 0 (zero) followed by <ENTER>.
Print Master will save all changes permanently in non-volatile
memory and return to the main configuration menu (
see Section
7.1.1
).
