BayTech PRINT MASTER 706A Page 19 Owner'S Manual Download | Manualshive

Page: 19 / 123

background image

11

To run INSTALL, use the following procedure:

1.

Insert the software utility diskette into drive A (or drive B) and
from the prompt type INSTALL followed by <ENTER>.

2.

A menu titled "Drive & Directory Definitions" will appear on your
screen. This menu will display the

Source Drive

,

Destination

Drive

, and

Destination Directory

. The Source Drive is the

floppy drive where the diskette is inserted. The Destination
Drive is the drive where the expanded files will be copied to
(default is drive C). The Destination Directory is the directory
where the files will be copied to (default is BAYTECH). If the
default parameters do not match your application, you may use
the <TAB> key or a mouse to change fields and type in the
desired parameters. Once you have entered the appropriate
values, select "OK".

3.

A menu will appear on your screen titled "Series Definition".
This menu will contain choices for the type of BayTech product
you have purchased. Highlight "700 Series" with the arrow
keys or mouse followed by "OK".

4.

A menu titled "Printer Selection Programs" will appear on your
screen. You are given three selections: RAMEXEC, RAMTSR,
and WNDEXEC. Choose RAMEXEC if your PC runs non-
Windows programs that do not operate in graphics mode.
Choose RAMTSR if your PC runs non-Windows programs
which operate in graphics mode. Choose WNDEXEC if your
PC runs under WINDOWS. Select the desired program by
highlighting it with the mouse or <TAB> key and depress the
<SPACE BAR> followed by "OK".

5.

When INSTALL is finished, you may review the instructions for
the relevant files by referring to the README file copied to the
Destination Directory. To view the README file on your
screen, enter the command TYPE README from your
subdirectory prompt. To print this file, enter the command
COPY README LPT1: from your subdirectory prompt.

«
...
17
18
19
20
21
...
»

Summary of Contents for PRINT MASTER 706A




























































































































Reviews:

No comments

Related manuals for PRINT MASTER 706A

Brand: Samson Pages: 48

Brand: Mako Networks Pages: 15

Brand: IBM Pages: 105

ESSENSSE NEO COMFORT

Brand: 2VV Pages: 21

AirGENIO SUPERIOR

Brand: 2VV Pages: 27

Brand: Yardney Pages: 8

Brand: Danfoss Pages: 2

Brand: Danfoss Pages: 2

Brand: Danfoss Pages: 12

Brand: Danfoss Pages: 24

Brand: Danfoss Pages: 60

Brand: Danfoss Pages: 10

Brand: Danfoss Pages: 20

Brand: cinetto Pages: 56

Brand: Dejero Pages: 24

Brand: WINDY NATION Pages: 16

Brand: Kaba Mauer Pages: 10

CIATControl OPC Server

Brand: CIAT Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands