F/W Version 2.1
14
RUDDER
Quickly move the nose of the aircraft to the left around the yaw axis. The rudder should flap right
as shown.
12.9.
Servo Frequency
Ver.2.1 provides 5 operating frequencies for the servos including
50Hz, 63Hz, 83Hz, 125Hz and 250Hz.
Analog servos usually
tolerate only 50Hz
while digital servos allow usually higher
frequencies. But you may need to check the manual of the servos.
If you don't know what the maximum frequency your servos can tolerate, please keep the default setting 50Hz.
A
higher driving frequency can lead to a failure of the servos!
12.10.
Response Rate
A3X Pro E.
provides five levels of response rate, the faster the rate
the more sensitive the gyro. The default setting is acceptable for
most aircrafts. To optimize the performance, the response rate is
the faster the better, but you have to do your best to reduce
vibration of your aircraft.
HTTP://WWW.BAY-TEC.DE
Sept. 12, 2013
