
4 Operating the Salt Relax POWER
12
Heating mode (via timer with optional climate control)
This mode functions like Automatic mode but in addition offers the option of regulating the temperature.
Set desired temperature with
/
. There is a hysteresis of 1°C (e.g. desired temperature is 23°C - the
system switches on the heating when the temperature falls below 22°C and switches it off as soon as a
temperature of 23°C is reached).
ON: The filtration pump remains switched on even after the end of a filtration cycle if the measured water
temperature is below the desired temperature. When the desired temperature is reached, filtration and
heating stop until the next programmed filtration cycle.
OFF: The heating runs during the set filtration cycles only.
To set the daily switch-on and switch-off times (up to 3 filtration cycles possible), see Automatic mode.
Sets the speed of the circulating pump in the respective filter periods (only when using a circulating pump
with variable speed control).
Press the
or
keys to access and also change the setting. Use
or
to switch between 1, 2 and
3. Confirm your entry with
.
The speed of the pump is set to slow with S, medium with M and fast with F.
see below
Smart mode
This mode is based on Automatic mode. In addition, the filtration times are adjusted in accordance with the
temperature. 2 temperatures are entered to do this:
If the temperature falls below this temperature setting, the filtration time is reduced to 5 min/hour.
Above the set temperature, filtration runs at the set times.
Between these two temperatures, the filtration times increase in a linear progression.
Set the temperatures using
/
.
If Antifreeze mode is activated, the filtration pump is switched to continuous operation as soon as the water
temperature falls below 2°C.
Activate/deactivate frost protection with
/
To set the daily switch-on and switch-off times (up to 3 filtration cycles possible), see Automatic mode.
Sets the speed of the circulating pump in the respective filter periods (only when using a circulating pump
with variable speed control).
see below