Bayer HealthCare RapidPoint 400 Series, Service Manual

Page: 406 / 458

406 Rev. C
a. If prompted, enter your password, the service password, or the
password of the day.
b. Touch the
Status
button.
c. Touch
Setup
.
d. Touch
Printer and Devices
.
e. Touch
Communications
.
f. Touch
RS-232
and then touch
Configure
.
g. Ensure that the following options are selected for the
communication settings:
h. Touch the
Continue
button.
8. At the Communications screen, touch the
Continue
button.
The Wait screen appears while the system tests the connection
between the Rapidpoint 400 series system and the Rapidlink system.
At this time, the connection is unsuccessful.
9. When prompted that the connection was unsuccessful, touch
Continue
to display the Communications screen.
10. At the Rapidlink workstation, enter the communication settings as
described in Appendix B of the Rapidlink Supervisor’s Manual.
11. At the Rapidpoint 400 series system, touch the
Continue
button to exit
from the Communications screen.
The Wait screen appears while the system tests the connection
between the systems.
12. Refer to the Rapidlink Supervisor’s Manual to complete any additional
setup that may be necessary to operate the Rapidpoint 400 series
system with the Rapidlink program.
Setting Default Selection
Baud 9600
Parity Even
Data Bits 8
Modem None (no modem connected)