Bayer HealthCare MEDRAD MRXperion, Operation Manual, Page: 59 / 126

Operation Manual 10 - 49
7.
Optionally, set or modify a reminder.
Reminders are alerts that display after an operator-defined amount of time. The system stores reminders as part of
the protocol.
a.
Select Reminders (1) from the Home Screen.
Figure 10 - 4: Enter Reminders
b.
Select an empty reminder slot (2) to enter new or additional reminders or select an existing reminder (3) to
modify the parameter.
c.
Enter the time for the reminder in minutes and seconds using the keypad (4).
d.
Select the type of reminder (5), then select Enter (6).
Q
Injection Reminder: Displays after the operator-defined time has elapsed since initiating the injection.
Q
Post Injection Reminder: Counts down from when the protocol completes instead of counting up from the
protocol initiation like the standard reminder. Displays after the operator-defined time has elapsed after
an injection has completed. Post-injection reminders begin counting once the injection is complete and
will not display if the Injection Completed screen is exited before the operator-defined amount of time has
elapsed since the completion of the injection.
e.
Optionally, select the description field (7). A keyboard will popup on the screen and the operator can add a brief
description that will appear on the reminder dialog. Type the description and press
Enter .
f.
Optionally, select an existing reminder, then select Remove (8) to delete it.
g.
Select OK to save changes and return to the Home Screen.
8.
Optionally, modify parameters for a test injection.
A test injection is defined separately from the protocol. The test injection parameters are defined via the Test Inject
button on the Home Screen.
The test injection can be initiated by pressing the Test Inject button on the injector head after the I Checked for Air
confirmation is completed and before the start of the protocol. The injector head must be tilted downward to initi-
ate a test injection.
1
4
6
8
5
2
3
7