Bayer HealthCare MEDRAD MRXperion, Operation Manual, Page: 23 / 126

Operation Manual 4 - 13
4 System Overview
Q
"System Diagram"
Q
"Moving the System"
Q
"Fluid Delivery Basics"
Q
"Syringe Installation Features"
Q
"Basic Informatics"
Q
"Programming Mode"
Q
"Using the Pedestal with Integrated IV Pole"
4.1 System Diagram
The system is comprised of a scan room unit (injector) and a control room unit (workstation). These components are
connected by a fiber optic communications link.
NOTE:
When using the system with an open-bore scanner, it is recommended that the injector be placed a
minimum of 60 inches (152.4 cm) from the facade of the scanner.
NOTE:
When using the system with a Siemens MAGNETOM 1.5T or 3.0T scanner, it is recommended that the
injector be placed a minimum of 18 inches (45.72 cm) from the facade of the scanner.
NOTE:
Consider limits on the length of the connector tubing and patient position when placing the injector.
NOTE:
Do not place the scan room unit in a magnetic field greater than 1000G without the casters being locked.
WARNING
Patient and/or worker injury or equipment damage may result.
Q
The workstation (control room unit) is MR unsafe and is not for use in the scan room. The workstation is a known threat or poses
a hazard in all MR environments as defined by the ASTM International Standards for MRI Device Marketing.
Q
The Injector (scan room unit) and power supply are MR conditional. The scan room unit and power supply have been
demonstrated to pose no known hazards in a specific MR environment with specified conditions of use as defined by the ASTM
International Standards for MRI Device Marketing.
Q
Do not make any unauthorized modifications to the injector or any of its parts.