Bayer HealthCare MEDRAD MRXperion, Operation Manual, Page: 102 / 126

17 - 92 MEDRAD® MRXperion
17.3.4 Cleaning the Pedestal and Base
Frequency: Daily
Materials :
Q
Clean, soft, non-linting wipe
Q
Warm water
Q
Cleaning agent:
Q
Use either Sani-Cloth® Plus Germicidal Disposable Cloth (EPA registration # 9480-6) or CaviWipes™ Disinfect-
ing Towelettes (EPA registration # 46781-8) within the United States.
Q
Use either Sani-Cloth® Plus Germicidal Disposable Cloth or CaviWipes™ Disinfecting Towelettes in all other
countries. If neither Sani-Cloth® Plus Germicidal Disposable Cloth nor CaviWipes™ Disinfecting Towelettes are
available within your country then use a disinfectant with 0.25% - 0.30% quaternary ammonium compounds
and 14.8% - 20% isopropanol.
1.
Turn off power to the injector.
2.
Wipe the pedestal and base with a clean, soft, non-linting wipe dampened with warm water for 1 minute.
3.
Wipe the pedestal and base with Sani-Cloth Plus or CaviWipes for 1 minute or until visibly clean.
NOTE:
If in a country where Sani-Cloth Plus or CaviWipes are not available, and using an equivalent cleaning
agent (refer to the materials listed above), follow the same instructions specified in step 3.
4.
Inspect the pedestal and base to ensure all surfaces are clean.
5.
If any visible contrast media or other debris is evident, repeat the cleaning instructions steps 2 through 5 until no
visible soil is detected.
NOTICE:
Electro-Mechanical Hazard - Equipment Damage may result.
Q
Do not use chlorine bleach or bleach equivalents on the pedestal.