36
DBA DIAGNOSTICS
13
Determine if Bill Acceptor has power:
Turn game ON—The bill acceptor should make noise as stacker cycles and
green lights on outside bezel should flash.
If NO power:
Use meter to measure 110 AC voltage at cable going into Bill Acceptor from
power strip.
If power is OK:
Clean Bill Acceptor path to make sure there is nothing jamming unit.
Check dipswitch settings on side of acceptor.
Make sure switch # 8 is OFF for Always Enable
ERROR CODES
Count the number of flashes on front bezel of Bill Acceptor and follow chart for repair.
Note: There are many different models and brands of Bill Acceptors that are used on
redemption games. Your Bill Acceptor may differ from the unit shown.
Standard DBA is MEI # AE2451-U5E Part # A5AC9091
Summary of Contents for Pop the Lock
Page 12: ...12 HEIGHT MODIFICATION OPTIONS...
Page 23: ...23 MAINBOARD PINOUT 15...
Page 39: ...39 DECALS DIAGRAM 20...