10
SETUP GUIDE WITH HASP CONT.
Lift the monitor face/vacuum form up
towards the monitor. Route all wires
through the rear before pinching them.
Rehook the latches in the top rear of the
cabinet to secure the face in place.
Plug the top marquee light cable (CE5931)
into CE5932.
Secure the hasp piece in place using the
four included bolts and washers. Tighten
in place.
Summary of Contents for Pop the Lock
Page 12: ...12 HEIGHT MODIFICATION OPTIONS...
Page 23: ...23 MAINBOARD PINOUT 15...
Page 39: ...39 DECALS DIAGRAM 20...