manualshive.com logo in svg

Bay Networks BayStack350T, User Manual, Page: 82 / 140

Share
Download
Bay Networks BayStack350T User Manual Download Page 82

Using the BayStack Model 350T 10/100 Autosense Switch

3-20

893-00992-A

VLAN Configuration

The VLAN Configuration screen (see 

Figure 3-8

) allows you to configure your 

BayStack 350T switch with as many as eight virtual LANs (VLANs). The screen 
provides a matrix that allows you to group the switch ports into logical (virtual) 
workgroups. Users within each of the logical workgroups can share resources but 
cannot communicate with users in other logical workgroups.

Figure 3-8

 shows the default setting for the VLAN Configuration screen, with all 

16 ports configured in VLAN V1.

Figure 3-8.

VLAN Configuration screen

VLAN Configuration

         Port    V1     V2     V3     V4     V5     V6     V7     V8

         ----   -----  -----  -----  -----  -----  -----  -----  -----

           1    [ X ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           2    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           3    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           4    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           5    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           6    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           7    [ X ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           8    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

           9    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

          10    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

          11    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

          12    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

          13    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

          14    [ x ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

          15    [ X ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

          16    [ X ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]  [   ]

Use space bar to display choices, press <Return> or <Enter> to select choice.

Press Ctrl-R to return to previous menu.  Press Ctrl-C to return to Main Menu.

BOOK.MKR  Page 20  Tuesday, March 4, 1997  7:24 PM

Summary of Contents for BayStack350T













































































































































Reviews:

No comments