Bay Networks BayStack350T, User Manual, Page: 53 / 140

Installation
893-00992-A
2-5
Installing the BayStack 350T Switch
This section explains how to install, power up, and verify the operation of the
BayStack 350T switch. Before you begin these procedures, read and follow the
instructions in
“Site Preparation ” on page 2-3 .
The BayStack 350T switch can be installed in any of the following locations:
• Surface mount
— Tabletop or shelf (secured or unsecured)
— Wall mount
• Rack mount—19-inch equipment rack
Surface Mounting
The BayStack 350T switch can be surface mounted onto any appropriate surface
that can safely support the weight of the switch and attached cables, as long as
there is adequate space around the unit for ventilation and access to cable
connectors. Mounting brackets supplied with the switch allow you to secure the
BayStack 350T switch to the installation location.
Warning:
To avoid bodily injury from hazardous electrical current, do not
connect the power cord until instructed to do so.
Note: In most cases it is not necessary to secure the BayStack 350T switch
onto a tabletop or shelf. However, if conditions warrant securing the switch,
such as when installing the switch at locations that are subject to heavy traffic
or at overhead locations, you can secure the BayStack 350T switch with two
mounting brackets (supplied).
BOOK.MKR Page 5 Tuesday, March 4, 1997 7:24 PM