manualshive.com logo in svg

Bay Networks BayStack350T, User Manual, Page: 40 / 140

Share
Download
Bay Networks BayStack350T User Manual Download Page 40

Using the BayStack Model 350T 10/100 Autosense Switch

1-6

893-00992-A

Flash Memory Storage

The BayStack 350T switch uses flash memory to store the switch software image. 
Flash memory allows you to update the software image with a newer version 
without changing the switch hardware. An in-band connection between the switch 
and the TFTP load host is required to download the software image (refer to 

“Software Download

” on 

page 3-44

). For information about connecting a console 

terminal for this procedure, refer to 

“Service Port Cabling

” on 

page 3-2

.

If the BayStack 350T switch detects a corrupted software image during self-test, it 
automatically downloads a new software image, using the Bootstrap (BootP) and 
TFTP protocols.

BootP Automatic IP Configuration Capability

The BayStack 350T switch has a unique 48-bit hardware address, or MAC 
address, that is printed on a label on the back panel. This is the MAC address you 
use when you configure your network BootP server to recognize the BayStack 
350T switch BootP requests. A properly configured BootP server allows the 
switch to automatically learn its assigned IP address, its subnet mask, the IP 
address of the default router (default gateway), and the software image file name. 
Refer to 

Appendix D, “Sample BootP Configuration File

,” to see an example of a 

BootP configuration file.

SNMP MIBs Support

The BayStack 350T switch supports an SNMP agent with private MIB extensions. 
Built-in SNMP agent support ensures compatibility with existing network 
management tools. The BayStack 350T switch supports MIB-II (RFC 1213) 
standards that provide access to detailed management statistics. With SNMP 
management, you can configure SNMP traps to be generated automatically for 
conditions such as an unauthorized access attempt or changes in operating status 
on individual ports.

BOOK.MKR  Page 6  Tuesday, March 4, 1997  7:24 PM

Summary of Contents for BayStack350T













































































































































Reviews:

No comments