Bay Networks BayStack350T, User Manual, Page: 54 / 140

Using the BayStack Model 350T 10/100 Autosense Switch
2-6
893-00992-A
Installing Mounting Brackets
Figure 2-2 shows the mounting bracket positions for surface mounting the
BayStack 350T switch onto a flat surface such as a tabletop, shelf, or wall. When
rack mounting the switch, the same brackets are used, but they are positioned to
attach to the rack mount holes in the chassis (see
Figure 2-5 ).
Figure 2-2. Attaching mounting brackets for a surface mount
To install the mounting brackets for surface mount configurations, follow these
steps:
1.
Locate the surface mounting holes on both sides of the switch (see
Figure 2-2 ).
2.
Using a Phillips (or cross-head) screwdriver, attach the two mounting
brackets to both sides of the switch with the four screws supplied with the
unit.
3.
Attach the switch to the tabletop, shelf, or wall as described in the
appropriate section.
350T
10/100 Autosense Switch
585FA
BOOK.MKR Page 6 Tuesday, March 4, 1997 7:24 PM