Modèle
RAD
Poids seul
Manuel d’usager
17
ES
FR
ENG
9. PARAMÈTRES
La balance a 12 paramètres qui peuvent être programmés par l’utilisateur. Ceci permet à l’utilisateur de programmer la balance:
▪ Écran de poids avec filtre pour diminuer les effets des vibrations, vent ou d’autres conditions environnementales.
▪ Contrôler le rétro éclairage de l’écran. Il peut être nécessaire de l’éteindre pour maximiser la vie de la batterie.
▪ Programmez la RS-232.
▪ Programmez l’accumulation à l’impression.
▪ Programmez le rang de auto zéro.
▪ Choisissez une autre unité de poids qui n'est pas standard.
▪ Programmez l’alarme dans des conditions (vérificateur de poids).
▪ Programmez la vitesse ADC.
Pour programmer les paramètres pressez les touches
et
en même temps.
L’écran montrera “Inc xx”: La première valeur qui apparaît est la valeur de fraction de la balance. Pour choisir une valeur différente
pressez la touche
pour changer la valeur et ensuite pressez la touche
.
Par exemple pour une 15Kg la valeur standard est 5 grammes, la valeur peut être changée 1.0 ou à 2.0 g.
Le prochain paramètre est le réglage de la fonction rétro éclairage. Le standard est d’avoir le rétro éclairage inactif quand la balance ne
sera pas utilisée. Le rétro éclairage peut être programmé “BK ON”, “BK AU” (automatique), ou “BK OFF”. L’optimisation de la batterie
est obtenu quand Le rétro ecclésialement inactif.
Appuyer la touche
pour changer la valeur et ensuite pressez
.
RS-232. Avec “AU ON” la mémoire accumulera le poids automatiquement (méthode impression auto). “Au OFF” permettra
l'accumulation manuelle (méthode impression manuel) et avec “P COnt” programmera l'interface RS-232 et enverra le poids conti-
nuellement (méthode PC ordinateur). “ASK” est la méthode d’interrogation (mode bidirectionnel), la balance opérera par le biais de la
RS-232.
T
Opération Tare
Z
Opération zéro
R
Envoie l’information de poids actuel au PC
Appuyer la touche
Pour changer la valeur et ensuite appuyer la touche
.
Ensuite l’écran montrera “b xxxx”, ceci est un baud rate, vous pouvez utiliser la touche
pour choisir 600bps/1200bps/4800bps/
9600bps, appuyer
pour valider.
Si vous programmez “AU on” o “AU off” (mode impression), alors l’écran montrera “TP”/ “LP-50/EPM o / “OFF” , ce type d’impression,
EPM205 concerne l’étiquette thermique interne de l’imprimante, vous pouvez utiliser la touche
pour choisir, ou la programmer
comme “OFF”, utilisez la touche
pour valider.
Si vous programmez comme “LP-50”, alors l’écran montrera “ENG” o “CHI”, ceci est format impression, “ENG” est anglais, “CHI” est
chinois, vous pouvez utiliser la touche
pour choisir, pressez la touche
pour valider.
Pour accumuler avec impression, sur “ACC ON” quand vous imprimerez il y aura une accumulation, “ACC OFF” imprimera seulement
sans accumulation.
Pressez la touche
pour changer les paramètres et ensuite pressez la touche
.
La recherche du rang auto zéro est la prochaine opération, vous pouvez choisir 0,5d, 1d, 2d, et 4d.
Appuyer sur la touche il
pour changer les paramètres appuyer ensuite sur la touche
.
L’unité de poids qui est montrée sur l’écran sera ensuite programmée. La balance est normalement calibrée en kilogrammes, et mon-
trera le poids en grammes, oz ou lb selon l'option qui est choisie.
Appuyer la touche
pour changer la valeur et ensuite appuyer la touche
.
Quand la balance est programmée pour montrer d’autres unités de poids, la fonction accumulation garde le poids en kilogrammes.