5.5.5
Positioning the indoor module
Before installing the indoor module, position the connection plate supplied
separately. Follow the instructions supplied with the plate.
Fitting of the indoor module is facilitated by 2 castor wheels attached to
the lower section.
5.5.6
Levelling the indoor module
Level the indoor module using the four adjustable feet.
(1) Adjustable feet with minimum required space of 10 mm
(adjustment range: 0 to 20 mm)
1. Open the hook on the expansion vessel to access the feet at the rear
of the appliance.
2. Remove the expansion vessel.
3. Unscrew the feet using an Allen key.
4. Use a spirit level to check that the appliance is completely level.
5. Refit the expansion vessel in its housing and close the hook to
immobilise the vessel.
5.5.7
Attaching the indoor module to the wall
To prevent the indoor module from tipping over, we recommend attaching
it to the wall using the attachment provided on the top of the appliance.
Fig.39
Installation of the connection plate
MW-1001529-1
Fig.40
Fitting the indoor module
MW-3000675-1
Fig.41
MW
-30
0
06
6
0-
4
(1)
1
2
3
5 Installation
36
7654506 - v06 - 19112019
