Baxi luna duo-tec MP+ 1.35, Instruction Manual

Page: 38 / 100

7221369.01 (1-03/15) 38
INST
ALLER Section
(en)
CONFIGURATION
P40 5700 Not used (Do NOT change this parameter) - --- --- ---
P41 5710 Zone 1 heating circuit (1=enabled) - 1 0 1
P42 5715 Zone 2 heating circuit (1=enabled) - 0 0 1
P43 5730 DHW sensor (1=Tank sensor, 2=Thermostat, 3=instantaneous sensor) 1 1 3
P44 5890 Not used (Do NOT change this parameter) - 33 0 43
P45 5931 *BX2 sensor input (first auxiliary sensor – section 11) - 0 0 19
P46 5932
*BX3 sensor input (second auxiliary sensor – section 11) -
0
0 19
P47 5977
*Input H5 (multifunction input – 18=Room thermostat) -
18
0 32
P48 6020
*Configuration of accessory Expansion Unit -
0
0 7
P49 6024
Input EX21 module 1 (configuration of HC Safety Thermostat) -
0
0 1
P50 6046
Input H2 module 1 (multifunction input) -
0
0 58
P51 6097 Sensor type collector (1= NTC, 2= Pt 1000) - 2 1 2
P52 6110 Building time constant (depending on the insulations of the building) h 15 0 50
P53 6220 Software version - --- 0 99
P54 6600
LPB device address (BUS connection) - 1 16
P55 6601 LPB segment address (BUS connection) - 0 14
P56 6640 Clock time source - 0 3
MAINTENANCE
P57 7045 Time after maintenance month xxx 0 240
P58 6704 View/Hide secondary fault internal code (0=no) - 1 0 1
BURNER CONTROL
P59 9512 Required ignition speed rpm xxx 0 8000
P60 9524 Required minimum operating speed (low speed) rpm xxx 0 8000
P61 9529 Required maximum operating speed (high speed) rpm xxx 0 8000
BOILER CONTROL PANEL PARAMETERS
P62 - Unit of measurement (1=bar, °C – 2=PSI, °F) - 1 1 2
P63 - Control panel operation: (1=central, 0=local) - 1 0 1
P64 - Software version
-
xx 0 999
* see “Accessories not included in supply”
xx : the value depends on the software version xxx : the value depends on the type of boiler
(a)
: parameters read on the front boiler panel (fixed control panel)
(b)
: parameters read on the Remote Control