50
EcoBlue System
7219708 - 01 (04/15)
8
Operation
8.4
Use of the Control Panel
Boiler Information
View
Standby - Reset - Esc
Boiler On mode
/R
/P
+
+
R
Eco
B
l
ue
R
Mode
1. Press button until the required mode appears:-
To increase or decrease the boiler temperature
1. Press to increase the Central Heating temperature.
2. Press to decrease the Central Heating temperature.
An overheat thermostat (NTC) is positioned in the heat
exchanger which shuts down the appliance if the boiler
temperature exceeds 100°C. Press button to
re-establish normal operating conditions.
Central Heating
Temperature Adjustment
Display Screen
R
R
8.5
Frost Protection
1. The boiler incorporates an integral frost protection feature
that will operate in both Central Heating and Domestic Hot
Water modes, and also when in standby ( displayed) see
section 4.2.3 Boiler Frost Protection Mode.
R
Standby - Reset - Esc Button
Boiler Information View Button
Increase CH Temperature Button
Decrease CH Temperature Button
Inactive Button
Inactive Button
On/Off Selector Button
Key to Controls
When is displayed (Boiler On) the boiler will respond
to timed Heating or Hot Water demand.
N.B. If only is displayed the boiler will not operate !
On/Off Selector
Button
THESE BUTTONS
INACTIVE !
except when an
outdoor sensor relay
kit is connected
Except when an
outdoor sensor relay
kit is connected
