Supplied By www.heating spares.co Tel. 0161 620 6677
From the plug and cable connection supplied with the
fire unit, the following connections should be made,
making sure that the appropriate cable clamp is used
to hold the cable firmly.
Connect the blue wire (neutral) to the remaining
terminal marked
‘
N
’
. Connect the brown wire
(permanent live) to the remaining terminal marked
‘
L2
’
. Route the green & yellow wire (earth) through
the cut-out in the socket housing and connect it to the
earth terminal.
The earth wire should be long enough so that the
live and neutral wires will become taut before the
earth wire if the cable is pulled.
Refit the socket cover and fix in place with the
screw.
Refit the input socket assembly to the boiler base and
fix in place with the securing screw.
Reconnect the controls connection plug to the
input socket and again, fix in place with the
securing screw.
Clamp the input cable in place using the
appropriate clip.
10
