background image

7604251 - v.01 - 08052013

8

Baxi Avanta Plus

  Turn off the boiler gas tap.

Warning - Drain boiler

Drain the boiler and central heating system if you will not be using 
the home for a long period and there is a chance of night frost. 

LT.AL.W7H.000.217 + LT.AL.W7H.000.218

4  Disabling the boiler

The boiler must be disabled before any maintenance or repairs are 
carried out. If the central heating system is not used for a long time 
(during the holidays, for instance, or periods of milder weather) it is 
advisable to disable the boiler.

4.1 

Disable boiler with frost protection, during longer periods of non-use

  Set the room thermostat to a low temperature, e.g. 10°C,
 Switch setting 

p4

 to 

1

 (Eco mode), this will switch off the heat 

retention function.

Now the boiler will only start working to protect itself against freezing. 
With an external frost protection connected, the boiler can also prevent 
the central heating system from freezing.

Pre and After Sales Service

Our dedicated pre-and-after-sales teams are ready te give you the 
support you need. Its an integral part of the quality package that Baxi 
offers as standard with all products.
For all your queries please call the Avanta team on: 0844 871 1525

Contact Information

Sales Office: 0844 871 1544
After Sales Service: 0844 871 1525
Literature: 0844 335 8821
Training: 01322 275 604
Technical Helpline: 0844 871 1525
Spares Sales Office: 0844 871 1540

4.2 

Disable boiler without frost protection, during longer periods of non-use

  Switch off the boiler.

R

230 V

Gas

Fig.7 

Room ther Switch setting

Fig.8 Switch 

off

Fig.9 

Turn off gas

LT.AL.W7H.000.224

LT.AL.W7H.000.228

4   Disabling the boiler

Summary of Contents for Baxi Avanta Plus 18s

















Reviews: