6.5
Reading out measured values
6.5.1
List of measured values
The measured values are available in the Information menu of the
different PCBs.
Certain parameters are displayed:
according to certain system configurations,
according to the options, circuits or sensors actually connected.
Tab.28 Choosing the menu
Measured values
Selection
Measured values in the circuits:
CIRCA0
DHW
Choose the EHC–05 menu
Measured values in the additional circuits:
CIRCA1
CIRCB1
DHW1
CIRC1
CIRCAUX1
Choose the SCB-10 menu
Measured values connected to the operation of the heat pump Choose the EHC–05 menu
Tab.29 Available values: AM = Appliance Measures = Measured values on the appliance
Value
Description
Unit
EHC–05
SCB-10
AM012
Current main status of the appliance.
See
Control system sequence chapter
/
X
X
AM014
Current sub status of the appliance.
See
Control system sequence chapter
/
X
X
AM015
Heating pump operation
/
X
AM016
Flow temperature of appliance.
°C
X
AM019
Heating circuit water pressure
bar
X
AM027
Instantaneous outside temperature
°C
-
X
AM037
Position of the heating/domestic hot water reversal
valve
/
X
AM056
Flow rate in the system
/
X
AM091
Seasonal mode active (summer / winter)
0 =Winter
1 =Frost protection
2 =Summer neutral band
3 =Summer
/
X
X
AM101
Internal system flow temperature setpoint
°C
X
Tab.30 Available values: CM = Circuits Measures = Measured values in the circuits
Measurement
Description
Unit
EHC–05
SCB-10
CM030
Measure of the Room temperature of the zoneCIRCA0
and CIRCA1
°C
X
X
CM031
Measure of the Room temperature of the zone CIRCB1 °C
X
CM032
Not available
°C
X
CM033
Measure of the Room temperature of the zone CIRCC1 °C
X
6 Settings
7701562 - v02 - 22052018
iHPI
29
