Figure 4. Burner tray trim
6.4 Installation of the burner unit.
For installations without the 'Spanish Basket' casting.
z
Place the burner unit centrally within the fireplace opening. Position the burner to the rear of the
opening, this may be moved forward providing the front of the burner tray trim does not protrude
beyond the front plane of the fireplace opening by more than 28mm (See
figure 5
).
Figure 5. Burner positioning
For installations with the 'Spanish Basket' casting.
z
Place the casting centrally within the fireplace opening. Position the casting to the rear of the opening.
z
Place the burner unit inside the casting.
z
It is important that the burner tray trim touches the inner front face of the casting. This will give the
customer greater access to the control knob.
z
The casting may be moved forward providing the front of the burner tray trim does not protrude beyond
the front plane of the fireplace opening by more than 28mm (See
figure 5
).
Page 11 of 25
20/08/2012
http://www.partsarena.com/baxi/System/DATA/Dx/DS1/installation/2642/I39-2642/I...
