8 of 10
Any reproduction, distribution, modification, or dissemination of these instructions without written permission from Bavarian Soundwerks is
expressly forbidden and a violation of international copyright law. Any violation will result in prosecution to the full extent available under
the law!
© 2006 Bavarian Soundwerks, LLC.
2195 Defoor Hills Rd., Suite D, Atlanta, GA 30318
P: 404.963.8857 |
www.bavsound.com
4. Once removed, place the new tweeter in the factory tweeter’s location.
5. Using your hot glue gun, place a bead of hot glue around the outer perimeter of the tweeter,
securing it to the grille housing.
6. Allow 2-3 minutes for the glue to dry, then reinstall the front portion of the assembly back through
the panel, and tighten the ring back into place. Plug the tweeter back in, and reinstall the panel.
Now enjoy your new audio system: go for a drive with the top down!
Stage 1 Speaker Upgrade Troubleshooting Guide:
If you’re experiencing an issue with your new speakers, please carefully read through this guide, as it covers
almost any issue that you are likely to encounter.
If the issue cannot be resolved, please call us at (404) 963.8857 for further support.
Here are the most common issues we’ve experienced:
•
No sound from speaker (s)
•
Distorted sound from speaker (s)
•
Lack of Bass response
•
Too much Treble (harshness, brightness, etc.)
•
Physically defective speaker (broken or damaged during shipping, no sound)
•
Missing product
